|
This is our high quality Serial to USB adapter. This item uses FT232RL FTDI CHIP and has best in Class Windows 7/2008/Ce/Linux/Mac Support. You won't be able to find a better and more reliable USB Serial adapter anywhere! It is optimized for Windows Vista and Windows 7 32 and 64-bit versions but will of course also work perfectly fine with Windows 98, 2000 and XP. This Serial to USB adapter is suitable for most applications, including industrial, commercial and any general office computer device. It is designed with a high performance quality processor chip which makes this Serial to USB adapter one of the most reliable and professional Serial to USB adapters on the market. It easily lets you connect any RS232 device directly to your computer's USB port, without experiencing any troubles like computer freeze, IO problems or any other driver problems.
This Serial to USB adapter is powered from the computer's USB port so no additional external power source is needed. The RS232 end is a standard 9-pin D-sub connector for easy connection of standard serial cables.
After installing the included drivers and connecting the Serial to USB adapter, it will show up as a virtual serial COM port in Windows Device Manager where you can manage and configure it like it was a standard built-in serial COM port.
It is build around the high-end quality processor chip FT232RL from FTDI Semiconductors which is one of the best and most reliable Serial to USB adapter chipsets on the market, including a ZT213LEEA RS232 transciever from ZyWyn USA. 
Gearmo Serial RS-232 DB-9 FTDI Chip Adapter Features
- Serial to USB adapter compatible with:
Windows 7 32/64, Vista 32/64 XP32/64, Server 2003/8 32/64, 2000, ME, 98Se, Mac and Linux
- Red Green LED's for Power, TX and RX
- No power supply needed, plug and play
- No IRQ / DMA conflicts
- 3 feet (1 meter) cable
- Baud rate: 300bps to 1Mbps
- RS232 output power: -5.7 to +5.7VDC
- USB 1.1 and 2.0 compliant
- Automatic send data control
- Auto detection of data speed
- Zero delay automatic transmission
- Built-in static and surge protection up to 600W
- FCC, CE and RoHS approved
- Lifetime Warranty
|
From $19.98
Also Available in a Short 8 inch version
Click here to Buy the Short Cable Version
|
|
|
|
|
|
Standard
|
USB1.1/2.0, EIA RS-232 standard
|
|
RS232 signals
|
TX, RX, RTS, CTS, DTR, DSR, RI and GND
|
|
Baud rate
|
300-921.600bps, auto detect signal rate
|
|
ESD Protection
|
600W surge protection, 15KV static electricity protection
|
|
Serial connector
|
DB-9 Male
|
|
USB connector
|
Type A Male
|
|
Power consumption
|
Static consumption less than 88mA, dynamic average consumption less than 190mA
|
|
Dimensions
|
72mm x 32mm x 17mm
|
|
|
|
